MapleSim 6 Connector for B & R Automation Studio Installation and Licensing Guide

The MapleSim Connector for B & R Automation Studio package is a collection of procedures for generating and compiling B&R source code from MapleSim models in a Maple standard worksheet, generating the B & R archive from a MapleSim system and compiling the generated B & R component into a shared library. The MapleSim Connector for B & R Automation Studio(Functional Mockup Interface) itself, is a vendor and tool neutral standard interface used for model, software and hardware-in-the-loop simulation. For more information about the B&R, see http://functional-mockup-interface.org/index.html.

Before installing MapleSim 6 Connector for B & R Automation Studio, Maple 16.01 and MapleSim 6 must be installed and activated on your computer. For Maple and MapleSim installation and activation instructions, see the Maple 16 Installation and Licensing Guide and the MapleSim 6 Installation and Licensing Guide found in the Install.html files on your product installation discs.

MapleSim 6 Connector for B & R Automation Studio Installation Using a Single User License

For Windows® XP, Windows Server® 2008, Windows Vista®, and Windows® 7 single user installation, read this section. For 64-bit Windows, see 64-bit Windows Single User Installation.

During the installation, you will need your purchase code, generally sent to you in an email.

To install MapleSim 6 Connector for B & R Automation Studio on your Windows operating system, read and complete the following tasks

1. Check the System Requirements for your operating system.

1. Logon as an administrator or log on to an account, with appropriate read and write privileges, that will own the MapleSim Connector for B & R Automation Studio files.

1. Ensure that you are connected to the Internet. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.

1. Ensure that you have reviewed the Pre-installation Instructions.

1. Choose one of the following two options to launch the installer:

1. Place the install disc in the DVD-ROM drive.

1. Locate and double-click MapleSim Connector for B & R Automation Studio6WindowsInstaller.exe from the install disc.

Double-click MapleSim Connector for B & R Automation Studio6WindowsInstaller.exe from where you downloaded the file.

1. Follow the on-screen instructions.

1. In the Choose The Type of Licensing screen, select Single User License .

1. When prompted, enter the purchase code and the required information to complete activation.

1. If you activated successfully, you are ready to use MapleSim 6 Connector for B & R Automation Studio. If you had problems activating or chose not to activate during the installation, see Activating Single User Versions.

Return to Start.

During the installation, you will need your purchase code, generally sent to you in an email.

To install MapleSim 6 Connector for B & R Automation Studio on your Windows operating system, read and complete the following tasks Xforce keygen 64 bit 2014.

For Windows® XP, Windows Server® 2008, Windows Vista®, and Windows® 7 single user installation, read this section. For 64-bit Windows, see 64-bit Windows Single User Installation.

During the installation, you will need your purchase code, generally sent to you in an email.

To install MapleSim 6 Connector for B & R Automation Studio on your Windows operating system, read and complete the following tasks

1. Check the System Requirements for your operating system.

1. Logon as an administrator or log on to an account, with appropriate read and write privileges, that will own the MapleSim Connector for B & R Automation Studio files.

1. Ensure that you are connected to the Internet. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.

1. Ensure that you have reviewed the Pre-installation Instructions.

1. Choose one of the following two options to launch the installer:

1. Place the install disc in the DVD-ROM drive.

1. Locate and double-click MS6B&RConnectorWindowsX86_64Installer.exe from the install disc.

Double-click MS6B&RConnectorWindowsX86_64Installer.exe from where you downloaded the file.

1. Follow the on-screen instructions.

1. In the Choose The Type of Licensing screen, select Single User License .

1. When prompted, enter the purchase code and the required information to complete activation.

1. If you activated successfully, you are ready to use MapleSim 6 Connector for B & R Automation Studio. If you had problems activating or chose not to activate during the installation, see Activating Single User Versions.

Return to Start.

For Macintosh® Intel 32- and 64-bit installation instructions, read this section.

During the installation, you will need your purchase code, generally sent to you in an email.

To install MapleSim 6 Connector for B & R Automation Studio on your Macintosh operating system, read and complete the following tasks:

1. Check the System Requirements for your operating system.

1. Logon as an administrator or log on to an account, with appropriate read and write privileges, that will own the MapleSim Connector for B & R Automation Studio files.

1. Ensure that you are connected to the Internet. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.

1. Ensure that you have reviewed the Pre-installation Instructions.

1. Choose one of the following two options to launch the installer:

1. Place the install disc in the DVD-ROM drive.

1. Locate and double-click MapleSim Connector for B & R Automation Studio6MacInstaller.dmg from the install disc, then double-click MS6B&RConnectorMacInstaller.

Double-click MapleSim Connector for B & R Automation Studio6MacInstaller.dmg from where you downloaded the file, then double-click MS6B&RConnectorMacInstaller.

1. Follow the on-screen instructions.

1. In the Choose The Type of Licensing screen, select Single User License .

1. When prompted, enter the purchase code and the required information to complete activation.

1. If you activated successfully, you are ready to use MapleSim 6 Connector for B & R Automation Studio. If you had problems activating or chose not to activate during the installation, see Activating Single User Versions.

Return to Start.

During the installation, you will need your purchase code, generally sent to you in an email.

To install MapleSim 6 Connector for B & R Automation Studio on your 32-bit Linux® operating systems, read and complete the following tasks.

1. Check the System Requirements for your operating system.

1. Logon as an administrator or log on to an account, with appropriate read and write privileges, that will own the MapleSim Connector for B & R Automation Studio files.

1. Ensure that you are connected to the Internet. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.

1. Ensure that you have reviewed the Pre-installation Instructions.

1. Choose one of the following two options to launch the installer:

1. Place the install disc in the DVD-ROM drive.

1. Locate and run MS6B&RConnectorLinux32Installer.bin from the install disc

Run MS6B&RConnectorLinux32Installer.bin from where you downloaded the file.

1. Follow the on-screen instructions.

1. In the Choose The Type of Licensing screen, select Single User License .

1. When prompted, enter the purchase code and the required information to complete activation.

1. If you activated successfully, you are ready to use MapleSim 6 Connector for B & R Automation Studio. If you had problems activating or chose not to activate during the installation, see Activating Single User Versions.

During installation, a B&RConnector6.desktop file is created in the bin directory of your MapleSim 6 Connector for B & R Automation Studio installation. If you request the installer to have a shortcut placed on your desktop, this file is also created in the ~/Desktop directory. If you wish to have a shortcut placed in your Applications menu, the B&RConnector6.desktop file can be copied to /usr/share/applications (which may require root access) or ~/.local/share/applications.

Return to Start.

During the installation, you will need your purchase code, generally sent to you in an email.

To install MapleSim 6 Connector for B & R Automation Studio on your 64-bit Linux® operating systems, read and complete the following tasks.

1. Check the System Requirements for your operating system.

1. Logon as an administrator or log on to an account, with appropriate read and write privileges, that will own the MapleSim Connector for B & R Automation Studio files.

1. Ensure that you are connected to the Internet. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.

1. Ensure that you have reviewed the Pre-installation Instructions.

1. Choose one of the following two options to launch the installer:

1. Place the install disc in the DVD-ROM drive.

1. Locate and run MS6B&RConnectorLinuxX86_64Installer.bin from the install disc.

Run MS6B&RConnectorLinuxX86_64Installer.bin from where you downloaded the file.

1. Follow the on-screen instructions.

1. In the Choose The Type of Licensing screen, select Single User License .

1. When prompted, enter the purchase code and the required information to complete activation.

1. If you activated successfully, you are ready to use MapleSim 6 Connector for B & R Automation Studio. If you had problems activating or chose not to activate during the installation, see Activating Single User Versions.

During installation, a B&RConnector6.desktop file is created in the bin directory of your MapleSim 6 Connector for B & R Automation Studio installation. If you request the installer to have a shortcut placed on your desktop, this file is also created in the ~/Desktop directory. If you wish to have a shortcut placed in your Applications menu, the B&RConnector6.desktop file can be copied to /usr/share/applications (which may require root access) or ~/.local/share/applications.

Return to Start.

MapleSim 6 Connector for B & R Automation Studio requires a license file to operate. License files for earlier versions of MapleSim Connector for B & R Automation Studio will not work with MapleSim 6 Connector for B & R Automation Studio. You must activate the single user version of MapleSim 6 Connector for B & R Automation Studio to obtain your license file. If you are running a single user installer, you can activate during the installation process. If you do not activate during the installation process, follow the steps below.

Note: Activation requires an Internet connection. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.

1. To launch the Maplesoft Activation window, select Start>(All) Programs>MapleSim 6 Connector for B & R Automation Studio>Tools>Activate MapleSim 6 Connector for B & R Automation Studio. Note: If you are using Windows Vista or Windows 7, right-click Activate MapleSim 6 Connector for B & R Automation Studio and select Run as administrator.

1. When the window opens, you will be prompted to enter your purchase code. After you have entered your purchase code, click Next. Note: If you are activating behind a proxy server, select the Yes option, and make sure to enter this information before clicking Next.

1. You will be prompted to enter additional information. Click Next when this is complete.

A MapleSim 6 Connector for B & R Automation Studio license file (B&RConnector.dat) will be saved in the license folder of your Maple 16 installation. If you experience difficulties with activation, check our FAQs page at http://www.maplesoft.com/support/Faqs/Activation.

1. To launch the Maplesoft Activation window, run the activation script located in the $HOME/Maple16/toolbox/B&RConnector/license directory.

1. When the window opens, you will be prompted to enter your purchase code. After you have entered your purchase code, click Next. Note: If you are activating behind a proxy server, select the Yes option, and make sure to enter this information before clicking Next.

1. You will be prompted to enter additional information. Click Next when this is complete.

A MapleSim 6 Connector for B & R Automation Studio license file (B&RConnector.dat) will be saved in the license folder of your Maple 16 installation. If you experience difficulties with activation, check our FAQs page at http://www.maplesoft.com/support/Faqs/Activation.

1. To launch the Maplesoft Activation window, run the activation script located in the toolbox/B&RConnector/license folder of your 16 installation. By default, /Library/Frameworks/Maple.framework/Versions/16/toolbox/B&RConnector/license.

1. When the window opens, you will be prompted to enter your purchase code. After you have entered your purchase code, click Next. Note: If you are activating behind a proxy server, select the Yes option, and make sure to enter this information before clicking Next.

1. You will be prompted to enter additional information. Click Next when this is complete.

A MapleSim 6 Connector for B & R Automation Studio license file (B&RConnector.dat) will be saved in the license folder of your Maple 16 installation. If you experience difficulties with activation, check our FAQs page at http://www.maplesoft.com/support/Faqs/Activation.

Return to Start.

MapleSim 6 Connector for B & R Automation Studio Installation Using a Network License

For Windows XP, Windows Server 2008, Windows Vista, and Windows 7 installation using a network license, read this section. For 64-bit Windows, see 64-bit Windows Installation Using a Network License.

To install MapleSim 6 Connector for B & R Automation Studio on your Windows operating system using a network license, read and complete the following tasks.

1. Check the System Requirements for your operating system.

1. Logon as an administrator or log on to an account, with appropriate read and write privileges, that will own the MapleSim Connector for B & R Automation Studio files.

1. Ensure that you are connected to the Internet. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.

1. Ensure that you have reviewed the Pre-installation Instructions.

1. Choose one of the following two options to launch the installer:

1. Place the install disc in the DVD-ROM drive.

1. Locate and double-click MapleSim Connector for B & R Automation Studio6WindowsInstaller.exe from the install disc.

Double-click MapleSim Connector for B & R Automation Studio6WindowsInstaller.exe from where you downloaded the file.

1. Follow the on-screen instructions.

1. In the Choose The Type of Licensing screen, select Network License .

1. When prompted, enter the name or IP address of the license server.

1. MapleSim 6 Connector for B & R Automation Studio is now installed. Prior to using MapleSim 6 Connector for B & R Automation Studio, you need to Configure the License Manager.

Return to Start.

To install MapleSim 6 Connector for B & R Automation Studio on your Windows operating system using a network license, read and complete the following tasks.

For Windows XP, Windows Server 2008, Windows Vista, and Windows 7 installation using a network license, read this section. For 64-bit Windows, see 64-bit Windows Installation Using a Network License.

To install MapleSim 6 Connector for B & R Automation Studio on your Windows operating system using a network license, read and complete the following tasks.

1. Check the System Requirements for your operating system.

1. Logon as an administrator or log on to an account, with appropriate read and write privileges, that will own the MapleSim Connector for B & R Automation Studio files.

1. Ensure that you are connected to the Internet. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.

1. Ensure that you have reviewed the Pre-installation Instructions.

1. Choose one of the following two options to launch the installer:

1. Place the install disc in the DVD-ROM drive.

1. Locate and double-click MS6B&RConnectorWindowsX86_64Installer.exe from the install disc.

Double-click MS6B&RConnectorWindowsX86_64Installer.exe from where you downloaded the file.

1. Follow the on-screen instructions.

1. In the Choose The Type of Licensing screen, select Network License .

1. When prompted, enter the name or IP address of the license server.

1. MapleSim 6 Connector for B & R Automation Studio is now installed. Prior to using MapleSim 6 Connector for B & R Automation Studio, you need to Configure the License Manager.

Return to Start.

For Macintosh® Intel 32- and 64-bit installation instructions, read this section.

To install MapleSim 6 Connector for B & R Automation Studio on your Macintosh operating system, read and complete the following tasks:

1. Check the System Requirements for your operating system.

1. Logon as an administrator or log on to an account, with appropriate read and write privileges, that will own the MapleSim Connector for B & R Automation Studio files.

1. Ensure that you are connected to the Internet. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.

1. Ensure that you have reviewed the Pre-installation Instructions.

1. Choose one of the following two options to launch the installer:

1. Place the install disc in the DVD-ROM drive.

1. Locate and double-click MapleSim Connector for B & R Automation Studio6MacInstaller.dmg from the install disc, then double-click MS6B&RConnectorMacInstaller.

Double-click MapleSim Connector for B & R Automation Studio6MacInstaller.dmg from where you downloaded the file, then double-click MS6B&RConnectorMacInstaller.

1. Follow the on-screen instructions.

1. In the Choose The Type of Licensing screen, select Network License .

1. When prompted, enter the name or IP address of the license server.

1. MapleSim 6 Connector for B & R Automation Studio is now installed. Prior to using MapleSim 6 Connector for B & R Automation Studio, you need to Configure the License Manager.

Return to Start.

To install MapleSim 6 Connector for B & R Automation Studio on your 32-bit Linux® operating systems, read and complete the following tasks.

1. Check the System Requirements for your operating system.

1. Logon as an administrator or log on to an account, with appropriate read and write privileges, that will own the MapleSim Connector for B & R Automation Studio files.

1. Ensure that you are connected to the Internet. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.

1. Ensure that you have reviewed the Pre-installation Instructions.

1. Choose one of the following two options to launch the installer:

1. Place the install disc in the DVD-ROM drive.

1. Locate and run MS6B&RConnectorLinux32Installer.bin from the install disc

Run MS6B&RConnectorLinux32Installer.bin from where you downloaded the file.

1. Follow the on-screen instructions.

1. In the Choose The Type of Licensing screen, select Network License .

1. When prompted, enter the name or IP address of the license server.

1. MapleSim 6 Connector for B & R Automation Studio is now installed. Prior to using MapleSim 6 Connector for B & R Automation Studio, you need to Configure the License Manager.

During installation, a B&RConnector6.desktop file is created in the bin directory of your MapleSim 6 Connector for B & R Automation Studio installation. If you request the installer to have a shortcut placed on your desktop, this file is also created in the ~/Desktop directory. If you wish to have a shortcut placed in your Applications menu, the B&RConnector6.desktop file can be copied to /usr/share/applications (which may require root access) or ~/.local/share/applications.

Return to Start.

To install MapleSim 6 Connector for B & R Automation Studio on your 64-bit Linux® operating systems, read and complete the following tasks.

1. Check the System Requirements for your operating system.

1. Logon as an administrator or log on to an account, with appropriate read and write privileges, that will own the MapleSim Connector for B & R Automation Studio files.

1. Ensure that you are connected to the Internet. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.

1. Ensure that you have reviewed the Pre-installation Instructions.

1. Choose one of the following two options to launch the installer:

1. Place the install disc in the DVD-ROM drive.

1. Locate and run MS6B&RConnectorLinuxX86_64Installer.bin from the install disc.

Run MS6B&RConnectorLinuxX86_64Installer.bin from where you downloaded the file.

1. Follow the on-screen instructions.

1. In the Choose The Type of Licensing screen, select Network License .

1. When prompted, enter the name or IP address of the license server.

1. MapleSim 6 Connector for B & R Automation Studio is now installed. Prior to using MapleSim 6 Connector for B & R Automation Studio, you need to Configure the License Manager.

During installation, a B&RConnector6.desktop file is created in the bin directory of your MapleSim 6 Connector for B & R Automation Studio installation. If you request the installer to have a shortcut placed on your desktop, this file is also created in the ~/Desktop directory. If you wish to have a shortcut placed in your Applications menu, the B&RConnector6.desktop file can be copied to /usr/share/applications (which may require root access) or ~/.local/share/applications.

Return to Start.

On Windows, it is possible to install the network version of MapleSim Connector for B & R Automation Studio using a silent mode option. For Windows XP, Windows Server 2008, Windows Vista, or Windows 7 (32-bit or 64-bit) follow these instructions. You must ensure that the information in the resource file is accurate.

1. Check the Windows System Requirements.

1. Close all programs, particularly Microsoft Excel and any previous release of MapleSim Connector for B & R Automation Studio

1. Log on as administrator or ensure that you have administrator privileges

You can create a resource file automatically by running the installer with the command MapleSim Connector for B & R Automation Studio6WindowsInstaller.exe -r <PATH>installer.properties (32-bit Windows) or MS6B&RConnectorWindowsX86_64Installer.exe -r <PATH>installer.properties (64-bit Windows), where <PATH> is the path to your specified directory. Follow the on-screen instructions and complete the installation.

You can use the installer.properties file generated by the -r flag or you can create your own using the following example as a template:

INSTALLER_UI=SILENT

#Choose Install Folder

#---------------------

USER_INSTALL_DIR=C:Program FilesMaple 16toolboxB&RConnector

#Install Desktop Shortcuts

#-------------------------

DESKTOP_SHORTCUTS='Yes','

DESKTOP_SHORTCUTS_1=Yes

DESKTOP_SHORTCUTS_2=

DESKTOP_SHORTCUTS_BOOLEAN_1=1

DESKTOP_SHORTCUTS_BOOLEAN_2=0

#Choose Watcom Install Folder

#----------------------------

WATCOM_INSTALL_FOLDER=C:watcom-1.3

#MapleSim Connector for B & R Automation Studio Worksheet Association

#----------------------------

WKS_ASSOC_RESULT='Yes','

WKS_ASSOC_RESULT_1=Yes

WKS_ASSOC_RESULT_2=

WKS_ASSOC_RESULT_BOOLEAN_1=1

WKS_ASSOC_RESULT_BOOLEAN_2=0

#Choose the Type of Licensing

#----------------------------

LICENSE=','Network License'

LICENSE_1=

LICENSE_2=Network License

LICENSE_BOOLEAN_1=0

LICENSE_BOOLEAN_2=1

LICENSE server

#----------------------------

LICENSE_SERVER=myserver.mydomain.com

PORT_NUMBER=

1. Open a command prompt window.

1. Browse to the directory in which your MapleSim Connector for B & R Automation Studio6WindowsInstaller.exe or MS6B&RConnectorWindowsX86_64Installer.exe file is located.

1. Run the silent installation process with the command MapleSim Connector for B & R Automation Studio6WindowsInstaller.exe -f installer.properties (32-bit Windows) or MS6B&RConnectorWindowsX86_64Installer.exe -f installer.properties.

Note: If you created your installer.properties file in a directory other than the directory in which the MapleSim Connector for B & R Automation Studio6WindowsInstaller.exe or MS6B&RConnectorWindowsX86_64Installer.exe file is located, you must specify the path to the installer.properties file when you run this command.

1. The INSTALLER_UI=SILENT line is not added automatically to the installer.properties file if it was created with the -r flag during installation. If the -r flag was used to create the installer.properties file, INSTALLER_UI=SILENT must be added as the first item in the file.

1. The template assumes MapleSim 6 Connector for B & R Automation Studio will be installed into the C:Program FilesMaple 16toolboxMapleSim Connector for B & R Automation Studio folder. If another location is desired, change the USER_INSTALL_DIR accordingly.

1. The template assumes MapleSim 6 Connector for B & R Automation Studio desktop icons will be placed on your desktop. To change this, replace the lines in the 'Install Desktop Shortcuts' section with:

DESKTOP_SHORTCUTS=','No'

DESKTOP_SHORTCUTS_1=

DESKTOP_SHORTCUTS_2=No

DESKTOP_SHORTCUTS_BOOLEAN_1=0

DESKTOP_SHORTCUTS_BOOLEAN_2=1

1. If required, the location of the WATCOM compiler can be changed. The pathname must not contain any spaces. If you omit the WATCOM_INSTALL_FOLDER field entirely, the WATCOM compiler will not be installed.

1. The template assumes MapleSim 6 Connector for B & R Automation Studio will be the default MapleSim Connector for B & R Automation Studio version (assuming other versions of MapleSim Connector for B & R Automation Studio are installed on the system). To change this, replace the lines in the 'MapleSim Connector for B & R Automation Studio Worksheet Association' section with:

WKS_ASSOC_RESULT=','No'

WKS_ASSOC_RESULT_1=

WKS_ASSOC_RESULT_2=No

WKS_ASSOC_RESULT_BOOLEAN_1=0

WKS_ASSOC_RESULT_BOOLEAN_2=1

1. Change the license server name (required) and add a port number (optional) accordingly

• You are not provided with any feedback when you run the installer in this mode

• While you can install the single-user version of MapleSim Connector for B & R Automation Studio silently, it is not possible to activate the product at this time. After the silent installation of the single user version of MapleSim 6 Connector for B & R Automation Studio is complete, from the Start menu, select All Programs, then MapleSim 6 Connector for B & R Automation Studio, then Tools and then Activate MapleSim 6 Connector for B & R Automation Studio.

1. To perform a silent uninstallation of MapleSim Connector for B & R Automation Studio, at a command prompt, run the following command.

'C:Program FilesMaple 16toolboxMapleSim Connector for B & R Automation StudioUninstall_MapleSim Connector for B & R Automation StudioUninstall.exe' -i silent

Return to Start.

Before starting the Windows Network version of MapleSim 6 Connector for B & R Automation Studio, you must obtain your license file and start the license manager by completing the following tasks.

1. Choose one of the following:

1. Double-click NetworkToolsInstaller_Windows.exe from the DVD or from where you downloaded the file.

1. Close all programs, particularly Microsoft® Excel and any previous release of MapleSim Connector for B & R Automation Studio.

MapleSim 6 Connector for B & R Automation Studio requires a MapleSim 6 Connector for B & R Automation Studio license file to operate. License files for earlier versions of MapleSim Connector for B & R Automation Studio do not work with MapleSim 6 Connector for B & R Automation Studio. To obtain your license file, you must use the MapleSim Connector for B & R Automation Studio activation program or activate off-line by following the instructions at http://www.maplesoft.com/contact/webforms/offlineactivation/. Ensure that you can connect to the Internet as activation requires an Internet connection. If your computer does not have an Internet connection, please contact Maplesoft customer service.

1. From the Start menu, select (All) Programs>Maple Network Tools>Activate MapleSim Connector for B & R Automation Studio. Note: If you are using Windows Vista or Windows 7, right-click Activate MapleSim Connector for B & R Automation Studio and select Run as administrator.

1. You will be prompted to enter your purchase code, hostname, and hostid of your license server. If you are activating behind a proxy server, make sure to enter this information before clicking Next.

1. You will be prompted to enter additional information including the number of licenses you are activating. Click Next when this is complete.

1. A license file, B&RConnector6.lic, will be saved to the C:Program FilesMaple Network Toolsactivate folder. You will need this license file in the next step.

The C:Program FilesMaple Network ToolsFLEXlm11.7windows directory contains license manager daemons (lmgrd and MapleSim Connector for B & R Automation Studiolmg) required to run MapleSim Connector for B & R Automation Studio, as well as utilities to assist you in installing and configuring FlexNet Publisher for your system.

If you intend to use a Novell® server, see Novell Networks.

To set up and start the license manager daemons on a Windows Network Server:

1. From the Start menu, select (All) Programs>Maple Network Tools>LMTools11.7.

1. Under the Service/License File tab, click Configuration using Services.

1. In the Config Services property sheet, enter or browse to the following files:

1. To set up the daemons as a service (recommended), select the Use Services check box. This is available for Windows XP, Windows Vista and Windows 7

1. To start the daemons at boot time (recommended), select the Start Server at Power Up check box

1. Click Save Service. When prompted to save the service, click Yes

1. Click the Start/Stop/Reread tab. In that property sheet, click Start Server to start the license manager daemons

You can now use MapleSim 6 Connector for B & R Automation Studio

To run Maple and associated products, you must place all license files in the same directory. If you have other FlexNet Publisher license files stored in one central location, you can store Maple and associated product license files there as well.

Note: Maple 16 and associated toolbox licensing is compatible with licensing for Maple 14, but not with licensing for versions previous to Maple 14. Maple and toolboxes earlier than version 14 need to be running the Maple 13 version of the Maple Network Tools.

Complete the following tasks:

1. Go to the directory of the FlexNet Publisher utilities that are currently being used and double-click lmtools.exe. Alternatively, in the Start menu, select (All) Programs>Maple Network Tools>LMTools11.7

1. Under the Service/License File tab, click Configuration using Services.

1. Click the Config Services tab. From the Server Name list, select the service currently being used.

1. Click the Start/Stop/Reread tab, then click Stop Server.

Using Windows Explorer, move all of the license files to a common directory, for example, C:Program FilesMaple Network Toolsactivate.

1. From the Start menu, select (All) Programs>Maple Network Tools >LMTools11.7.

1. Under the Service/License File tab, click Configuration using Services.

1. In the Config Services property sheet, enter or browse for the following:

1. To set up the daemons as a service (recommended), select the Use Services check box. This is available for Windows 2003, XP, Vista and 7.

1. To start the daemons at boot time (recommended), select the Start Server at Power Up check box.

1. Click Save Service. When prompted to save the service, click Yes.

1. Click the Start/Stop/Reread tab. In that property sheet, click Start Server to start the license manager daemons.

You can now use your network licensed Maplesoft products.

FlexNet Publisher does not run on Novell or IPX/SPX. Follow these instructions to install the license manager on any network that is exclusively a Novell environment.

1. Install TCP/IP on all client machines.

1. Select a Windows computer that has TCP/IP installed to act as a license server and run the license daemons using the Start License Manager for MapleSim 6 Connector for B & R Automation Studio Only instructions.

Return to Start.

Before starting the Mac OS® X Network version of MapleSim 6 Connector for B & R Automation Studio, you must obtain your license file and start the license manager by completing the following tasks.

1. Choose one of the following:

1. To begin installing the FlexNet Publisher and Activation Utilities, choose one of the following:

1. Place the MapleSim 6 Connector for B & R Automation Studio DVD in the DVD-ROM drive.

1. Double-click NetworkToolsInstaller_Mac.dmg from where you downloaded the file.

1. Run the installer by double-clicking the NetworkToolsInstaller_Mac icon.

MapleSim 6 Connector for B & R Automation Studio requires a MapleSim 6 Connector for B & R Automation Studio license file to operate. License files for earlier versions of MapleSim Connector for B & R Automation Studio do not work with MapleSim 6 Connector for B & R Automation Studio. To obtain your license file, you must use the MapleSim Connector for B & R Automation Studio activation program or activate off-line by following the instructions at http://www.maplesoft.com/contact/webforms/offlineactivation/. Ensure that you can connect to the Internet as activation requires an Internet connection. If your computer does not have an Internet connection, please contact Maplesoft customer service. Lirik lagu beauty and a beat justin bieber.

1. From the Finder, open a terminal window from Applications -> Utilities.

1. Change to the location of the activation utility directory. By default, /Users/<username>/Applications/Maple_Network_Tools/activate.

1. Run the activation script by issuing the command ./activation. To launch activation in console mode, use the -console option.

1. You will be prompted to enter your purchase code, hostname, and hostid of your license server. If you are activating behind a proxy server, make sure to enter this information before clicking Next.

1. You will be prompted to enter additional information including the number of licenses you are activating. Click Next when this is complete

1. When prompted, enter the name or IP address of the license server.

1. A license file, B&RConnector6.lic, will be saved to the /Users/<username>/Applications/Maple_Network_Tools/activate directory. You will need this license file for the next step.

Before you can use MapleSim 6 Connector for B & R Automation Studio, you must start the license server. It is recommended that you do not run lmgrd as root because any process run by root is a potential security risk.

1. Navigate to the location of the FlexNet Publisher utilities for your operating system. By default, /Users/<username>/Applications/Maple_Network_Tools/FLEXlm/11.7/.

1. To start the license manager daemon (lmgrd), enter the following command at the prompt:

./lmgrd -c license_file_path -l debug_log &

where license_file_path is the full path and filename of the network license file (by default, /Users/<username>/Applications/Maple_Network_Tools/activate/B&RConnector6.lic), and debug_log is the name of a file to which debugging information is written. The -l option (letter l, not the number 1 (one)) creates the file.

If you have any problems starting the license server in the system boot up files, refer to http://www.flexerasoftware.com

You can now use MapleSim 6 Connector for B & R Automation Studio

To run Maple and associated products, you must place all license files in the same directory. If you have other FlexNet Publisher license files stored in one central location, you can store Maple and associated product license files there as well.

Note: Maple 16 and associated toolbox licensing is compatible with licensing for Maple 14, but not with licensing for versions previous to Maple 14. Maple and toolboxes earlier than version 14 need to be running the Maple 13 version of the Maple Network Tools.

Complete the following tasks:

Go to the location of the FlexNet Publisher utilities that are currently being used. For MapleSim 6 Connector for B & R Automation Studio, the default location is /Users/<username>/Applications/Maple_Network_Tools/FLEXlm/11.7/. Enter the command:

./lmdown

Copy all the MapleSim Connector for B & R Automation Studio network license files to /Users/<username>/Applications/Maple_Network_Tools/activate.

1. Navigate to the location of the FlexNet Publisher utilities for your operating system. By default, /Users/<username>/Applications/Maple_Network_Tools/FLEXlm/11.7/.

1. When starting license manager daemons, you must enter the path to the directory containing all license files. By default, /Users/<username>/Applications/Maple_Network_Tools/activate.

Note: Point to the directory only, not an actual license file.

1. To start the license manager, enter the following command:

./lmgrd -c license_file_path -l debug_log

where license_file_path is the full path to the directory containing the license files and debug_log is the name of a file to which debugging information is written. The -l option (letter l, not the number 1 (one)) creates the file.

You can now use your network licensed Maplesoft products.

Return to Start.

Before starting the UNIX Network version of MapleSim 6 Connector for B & R Automation Studio, you must obtain your license file and start the license manager by completing the following tasks.

1. Choose one of the following:

1. On Linux 32-bit, run the NetworkToolsInstaller_Linux.bin file from the DVD or from where you downloaded the file.

1. On Linux 64-bit, run the NetworkToolsInstaller_LinuxX86_64.bin file from the DVD or from where you downloaded the file.

1. On Solaris, run the NetworkToolsInstaller_Sun.bin file from the DVD or from where you downloaded the file.

MapleSim 6 Connector for B & R Automation Studio requires a MapleSim 6 Connector for B & R Automation Studio license file to operate. License files for earlier versions of MapleSim Connector for B & R Automation Studio do not work with MapleSim 6 Connector for B & R Automation Studio. To obtain your license file, you must use the MapleSim Connector for B & R Automation Studio activation program or activate off-line by following the instructions at http://www.maplesoft.com/contact/webforms/offlineactivation/. Ensure that you can connect to the Internet as activation requires an Internet connection. If your computer does not have an Internet connection, please contact Maplesoft customer service.

1. Change to the location of the activation utility directory. By default, $HOME/Maple_Network_Tools/activate.

1. Run the activation command. To launch activation in console mode, use the -console option.

1. You will be prompted to enter your purchase code, hostname, and hostid of your license server. If you are activating behind a proxy server, make sure to enter this information before clicking Next.

1. You will be prompted to enter additional information including the number of licenses you are activating. Click Next when this is completed.

1. A license file, B&RConnector6.lic, will be saved to the $HOME/Maple_Network_Tools/activate directory. You will need this license file for the next step.

Before you can use MapleSim 6 Connector for B & R Automation Studio, you must start the license server. It is recommended that you do not run lmgrd as root because any process run by root is a potential security risk.

1. Navigate to the location of the FlexNet Publisher utilities for your operating system. By default, $HOME/Maple_Network_Tools/FLEXlm/11.7/.

Using the C Shell

To start the license manager daemon (lmgrd), enter the following command at the prompt,

where license_file_path is the full path and filename of the network license file (by default, $HOME/Maple_Network_Tools/activate/B&RConnector6.lic) and debug_log is the name of a file to which debugging information is written. The -l option (letter l, not the number 1 (one)) creates the file.

Using the Korn or Bourne Shell

To start the license manager daemon (lmgrd), enter the following command at the prompt:

Run Daemons on Startup

To have the daemons run on startup, edit the appropriate boot script (such as /etc/rc.boot, /etc/rc.local, or /etc/rc2.d/Sxxxx). For example, if you run lmgrd as a boot startup script, you can run it as a regular user by using the following su command at the prompt:

where username is a non-privileged user; lmgrd_path is the correct path to the lmgrd file, license_file_path is the full path of the network license file (by default, $HOME/Maple_Network_Tools/activate/B&RConnector6.lic), and log_path is the debug log file path. It is recommended that the network license file be called B&RConnector6.lic.

Help for Starting the License Server

If you have any problems starting the license server in the UNIX system boot up files, refer to http://www.flexerasoftware.com/.

You can now use MapleSim 6 Connector for B & R Automation Studio.

To run Maple and associated products, you must place all license files in the same directory. If you have other FlexNet Publisher license files stored in one central location, you can store Maple and associated product license files there as well.

Note: Maple 16 and associated toolbox licensing is compatible with licensing for Maple 14, but not with licensing for versions previous to Maple 14. Maple and toolboxes earlier than version 14 need to be running the Maple 13 version of the Maple Network Tools.

Complete the following tasks:

Go to the location of the FlexNet Publisher utilities that are currently being used. For MapleSim 6 Connector for B & R Automation Studio, the default location is /usr/local/Maple_Network_Tools/FLEXlm/11.7/. Enter the command:

Copy all of the MapleSim Connector for B & R Automation Studio network license files to one folder, for example, $HOME/Maple_Network_Tools/activate.

1. Navigate to the location of the FlexNet Publisher utilities for your operating system. By default, $HOME/Maple_Network_Tools/FLEXlm/11.7/.

1. When starting license manager daemons, you must enter the path to the directory containing all of your license files. By default, $HOME/Maple_Network_Tools/activate.

Note: Point to the directory only, not an actual license file.

1. To start the license manager, enter the following command:

./lmgrd -c license_file_path -l debug_log

where license_file_path is the full path to the directory containing the license files and debug_log is the name of a file to which debugging information is written. The -l option (letter l, not the number 1 (one)) creates the file.

You can now use your network licensed Maplesoft products.

Return to Start.

Named Network Users run MapleSim Connector for B & R Automation Studio on their own client machines. These client machines are connected to the license server over the network. The Network Named User licensing option allows system administrators to strictly enforce which users, or client machines, may run MapleSim Connector for B & R Automation Studio.

When you install Maple Network Tools, an options file (.opt) is automatically created in the $Maple Network Tools/activate directory.

Note: The vendor daemon, maplelmg.opt, by default, looks for the options file with in the same directory that contains the license file used by the license server manager.

To set up Named Network User licensing, perform the following steps:

To manually edit the options file, perform the following steps:

• Go to the directory that contains the options file. By default, this is $Maple Network Tools/activate.

• INCLUDE lines in an options file state which users can run the product. Add an INCLUDE line for each product. If there is more than one user per product, add an INCLUDE line for each user, as well. Alternatively, you can use the GROUP syntax to combine authorized Named Users for a specific product.

INCLUDE Maple USER User1

INCLUDE Maple USER User2

INCLUDE Maple USER User3

INCLUDE Maple USER User4

INCLUDE B&RConnector USER User4

GROUP Maple_users User1 User2 User3 User4

INCLUDE Maple GROUP Maple_users

INCLUDE B&RConnector USER User4

You must restart the license manager for the changes to the options file to take effect.

Return to Start.

Getting Started with the MapleSim Connector for B & R Automation Studio

When the installation and activation process is complete, start MapleSim. The MapleSim Connector for B & R Automation Studio palette appears on the left side of the MapleSim window when the toolbox is installed.

For more information, see the MapleSim Connector for B & R Automation Studio Getting Started Guide, which can be found on your desktop.

Return to Start.

• 16-bit color at 1024 by 768 (or greater) resolution recommended.

• System performance may be affected if running below the recommended memory requirement.

• 16-bit color at 1024 by 768 (or greater) resolution recommended.

• System performance may be affected if running below the recommended memory requirement.

• Classic Worksheet is not available on this platform.

• Java™ Runtime Environment 1.6.0_18 or higher installed

• 16-bit color at 1024 by 768 (or greater) resolution recommended.

• System performance may be affected if running below the recommended memory requirement.

• Classic Worksheet is not available on this platform.

• 16-bit color at 1024 by 768 (or greater) resolution recommended.

• Internal TCP/IP connections enabled.

• System performance may be affected if running below the recommended memory requirement.

• 16-bit color at 1024 by 768 (or greater) resolution recommended.

• Internal TCP/IP connections enabled.

• System performance may be affected if running below the recommended memory requirement.

• Classic Worksheet is not available on this platform

Return to Start.

Note: Maple uses the Flexera Software Corporation FlexNet Publisher as its license manager. This document contains all the information you require for a standard Maple installation. For more information, refer to the FlexNet Publisher documentation at http://www.flexerasoftware.com/.

Maple, Maplesoft, and Waterloo Maple are trademarks of Waterloo Maple Inc.

Intel is a registered trademark of Intel Corporation.

Microsoft, Windows, Windows Server, Windows Vista, Excel, and Internet Explorer are registered trademarks of Microsoft Corporation.

Macintosh and Mac OS are registered trademarks of Apple Computer, Inc.

NVIDIA is a registered trademark of NVIDIA Corporation.

Java, JRE, and Solaris are registered trademarks of Oracle and/or its affiliates.

FLEXlm is a trademark of Flexera Software Corporation Corporation.

Linux is a registered trademark of Linus Torvalds.

All other brand names or product names are trademarks or registered trademarks of their respective companies.

Return to Start.